We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf of Passtcert to help you pass your first time Cisco certification 300-135 exam is very cost-effective.Passtcert Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf are the most thorough, most accurate and latest practice test. You will find that it is the only materials which can make you have confidence to overcome difficulties in the first.
Share some CCNP 300-135 exam questions and answers below.
The fault condition is related to which technology?
A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPV4 and IPV6 Interoperability
E. IPv4 layer 3 security
Answer: D
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D
The tunnel between R1 and R3 is not coming up. Which two statements are true? (Choose two)
(Topology with a GRE tunnel and the outputs provided are show ip int brief and tunnel source and destination)
A. Tunnel source int Eth0/0 is down
B. No route from R1 to R3 loopback0 (tunnel destination)
C. source and destination not in same subnet
D. http://bbs.hh010.com/
Answer: AB
What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
Ticket 4 NATACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
! interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
! interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
On Which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
Passtcert have a strong It expert team to constantly provide you with an effective training resource. They continue to use their rich experience and knowledge to study the real exam questions of the past few years. Finally Passtcert 300-135 Troubleshooting and Maintaining Cisco IP Networks have advent, which will give a great help to a lot of people participating in the IT certification exams. You can free download part of Passtcert Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf as a try.
Let me be clear here a core value problem of Passtcert. All Cisco exams are very important. In this era of rapid development of information technology, Passtcert Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf provided by one of them. Why do most people choose Passtcert? This is because the exam information provided by Passtcert will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.
Related article: http://h31-531-enu.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
Share some CCNP 300-135 exam questions and answers below.
The fault condition is related to which technology?
A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPV4 and IPV6 Interoperability
E. IPv4 layer 3 security
Answer: D
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D
The tunnel between R1 and R3 is not coming up. Which two statements are true? (Choose two)
(Topology with a GRE tunnel and the outputs provided are show ip int brief and tunnel source and destination)
A. Tunnel source int Eth0/0 is down
B. No route from R1 to R3 loopback0 (tunnel destination)
C. source and destination not in same subnet
D. http://bbs.hh010.com/
Answer: AB
What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
Ticket 4 NATACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
! interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
! interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
On Which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
Passtcert have a strong It expert team to constantly provide you with an effective training resource. They continue to use their rich experience and knowledge to study the real exam questions of the past few years. Finally Passtcert 300-135 Troubleshooting and Maintaining Cisco IP Networks have advent, which will give a great help to a lot of people participating in the IT certification exams. You can free download part of Passtcert Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf as a try.
Let me be clear here a core value problem of Passtcert. All Cisco exams are very important. In this era of rapid development of information technology, Passtcert Troubleshooting and Maintaining Cisco IP Networks 300-135 TSHOOT dumps pdf provided by one of them. Why do most people choose Passtcert? This is because the exam information provided by Passtcert will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.Related article: http://h31-531-enu.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
Comments
Post a Comment