Skip to main content

EMC E20-885 exam questions and answers

Passtcert latest EMC E20-885 exam questions and answers have 95% similarity with the real test. If you use Passtcert EMC E20-885 exam questions and answers, you can 100% pass the exam. If you fail the exam, we will give a full refund to you.We are doing our utmost to provide services with high speed and efficiency to save your valuable time for the majority of candidates.
Share some Implementation Engineer E20-885 exam questions and answers below.
A storage administrator reports they are unable configure SAN Copy connections between two VNX. The required cabling is in place and zoning is correct, but the SP connections still do not appear in Unisphere Manager. What could have caused this issue? 
A. SAN Copy is not installed on both VNX arrays. 
B. SAN Copy is only licensed for local copies. 
C. The SP ports are already being used by hosts. 
D. Both VNX arrays are not in the same domain. 
Answer: D

A Pool used for FAST VP has the following configuration: 
Flash drives: 1,000 GB, with 1,000 GB free 
SAS drives: 5,000 GB, with 2,500 GB free 
NL-SAS drives: 20,000 GB, with 11,500 GB free 
The tiering policy is set to Auto. An additional 600 GB of new data is written to the Pool. What is the data distribution after the data is written? 
A. Flash drives: 960 GB free SAS drives: 2,400 GB free NL-SAS drives: 11,040 GB free 
B. Flash drives: 400 GB free SAS drives: 2,500 GB free NL-SAS drives: 11,500 GB free 
C. Flash drives: 900 GB free SAS drives: 2,000 GB free NL-SAS drives: 11,500 GB free 
D. Flash drives: 970 GB free SAS drives: 2,350 GB free NL-SAS drives: 11,080GB free 
Answer: A

A customer recently upgraded from vSphere v4.x to vSphere v5.0 to benefit from new VMFS-5 features for their existing ‘DataStore1’ and ‘DataStore2’ datastores on an EMC VNX. A second identically configured VNX was implemented and the customer created two additional datastores on the new VNX.After monitoring the environment, the customer notices the VMs on ‘DataStore1’ and ‘DataStore2’ are not using the same sub-block structure as the two new datastores. What is the reason for this behavior? 
A. The old VMs are on an upgraded VMFS-5 datastore. 
B. The old VMs are still running old VMware tools. 
C. The new VMFS-5 features need to be licensed and activated. 
D. The new VMFS-5 cannot support two VNX storage systems. 
Answer: A

You are planning a CIFS DR solution for two existing EMC VNX. Each VNX has dual Control Stations. Each VNX is also configured for a RecoverPoint protection solution on other VNX LUNs that are non-file related. What recommendation would you give the customer concerning the CIFS DR solution? 
A. Configure IP aliasing on the Control Stations for both source and destination VNX systems before configuring VNX Replicator 
B. Configure IP aliasing on the Control Stations for both source and destination VNX systems after configuring VNX Replicator 
C. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator, and then configure IP aliasing on the destination VNX system Control Stations after configuring VNX Replicator. 
D. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator and use RecoverPoint to provide protection of the source VNX Control Stations to the destination VNX. 
Answer: A

Select the appropriate shortcut just to guarantee success. The Passtcert exists precisely to your success. Select Passtcert is equivalent to choose success. The EMC E20-885 exam questions and answers provided by Passtcert is obtained through the study and practice of Passtcert IT elite. The material has the experience of more than 10 years of IT certification. In fact, you can take steps to pass the certification. Passtcert EMC E20-885 exam questions and answers bear with a large number of the exam questions you need, which is a good choice.


If you want to pass the exam?please using our Passtcert EMC E20-885 exam questions and answers. Passtcert EMC E20-885 Add to your shopping cart, it will let you see unexpected results. With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, EMC E20-885 exam certification is the essential certification of the IT industry.

Comments

Popular posts from this blog

Huawei certification H13-612-ENU exam dumps pdf

Passtcert is the best catalyst to help IT personage be successful. Many people who have passed some IT related certification exams used our Passtcert Huawei certification H13-612-ENU exam dumps pdf. Our Passtcert expert team use their experience for many people participating in Huawei certification H13-612-ENU exam to develope the latest effective  Huawei certification H13-612-ENU exam dumps pdf , which includes Huawei H13-612-ENU certification simulation test, the current exam and answers. Huawei certification  H13-612-ENU exam has become more and more popular in the fiercely competitive IT industry. Although more and more people sign up to attend this examination of, the official did not reduce its difficulty and it is still difficult to pass the exam. After all, this is an authoritative test to inspect the computer professional knowledge and information technology ability. In order to pass the HCNA certification H13-612-ENU exam, generally, many people need to spend a lo...

100% Valid | 70-761 Querying Data with Transact-SQL

Through the proof of many IT professionals who have use Passtcert 70-761 Querying Data with Transact-SQL, Passtcert is very reliable for you. Generally, if you use Passtcert targeted review questions, you can 100% pass  Microsoft certification   70-761  exam. Please Add Passtcert to your shopping cart now! Maybe the next successful people in the IT industry is you.In real life, every great career must have the confidence to take the first step. Share some  MCSA  70-761 exam questions and answers below. You create a table named Products by running the following Transact-SQL statement:  You have the following stored procedure:  You need to modify the stored procedure to meet the following new requirements:  - Insert product records as a single unit of work.  - Return error number 51000 when a product fails to insert into the database.  - If a product record insert operation fails, the product information must not be permanently written to ...